Every crown starts with an impression. When that impression is a scan instead of a tray of material, the savings show up in four places: chair time, impression supplies, remakes and rescheduled appointments. We see the difference from our side of the case every day. Here is what changes when a practice goes digital, and how to work out whether a scanner pays off for yours.

Where the savings come from

1. Chair time

A conventional impression means picking a tray, mixing and loading material, waiting for it to set, checking the pull and often taking it again. A scan replaces that with one pass of the wand. You see the result right away and rescan only the area that needs it, instead of the whole arch. The minutes saved add up across every crown, bridge, implant and aligner case you send.

2. Impression material, trays and shipping

With a scan there is nothing to mix, disinfect, bag or ship. The file goes to the lab the moment you send it, so you also skip the courier or UPS label for the impression, and the case starts in the lab the same day instead of after it arrives in the mail.

3. Remakes

Most impression-related remakes start with a problem nobody saw at the chair: a pulled margin, a bubble, a drag, a tray that flexed, a model that changed in transit. On a scan you can zoom in on the margin before the patient leaves and fix it then. The lab works from the same data you checked, with no pour and no stone model to distort. At GCDL, 97% of digital zirconia crowns fit the first time.

4. Rescheduling

A remake costs more than the lab fee. It costs a second seat appointment, a chair slot you could have filled with new work, and a patient who has to take more time off. Every remake you avoid is also an appointment you never have to rebook. Digital cases come back faster too: a typical digital zirconia crown spends about 4 days in our lab, and a scan reaches us about 3 days sooner than a shipped impression.

How the numbers work: one published model

Dental Practice Insider’s article Intraoral Scanner ROI: iTero vs Trios vs Medit lays out a simple way to see whether a scanner pays for itself. Its illustration plots the value a practice gets back against the number of scans it takes each month: the more you scan, the higher the value line climbs, and the point where it crosses the monthly cost of the scanner is break-even. Their caption sums it up: payback depends on case volume, not on the sticker price.

Their example uses round, made-up inputs (they say clearly it is an illustration, not a benchmark). In our own words:

Saving per scan How they value it Value
Chair time About 10 minutes saved, at an illustrative chair value $8
Impression material and shipping Material and courier you no longer buy $15
Remakes avoided One remake (lab fee plus a rebooked chair slot) avoided every 20 scans $9
Total recovered per scan $32

Divide an illustrative all-in monthly scanner payment by that $32 and you get the break-even point: in their example, about 21 scans a month, or roughly 5 a week. Every scan above that is money back to the practice.

Two things stand out from where we sit. First, the article calls remakes the biggest single lever in the math, which matches what we see: a remake costs you far more than a tray of material. Second, the inputs are yours to change. Use your own chair-time cost, your own material and shipping spend, and your own retake and remake log, and the same formula tells you your number.

What we see from the lab side

  • Cleaner starting data. A scan has no pour, no stone and no shipping delay, so there is less that can change between your chair and our design screen.
  • Faster answers. If something on a scan needs a second look, we can flag it as soon as the file arrives, instead of days later when an impression reaches us by mail.
  • Stored files. The scan stays on file, so a lost or broken restoration can be made again without bringing the patient back for a new impression.
  • The same workflow from anywhere. We are a national lab based in Chicago, and scans reach us from every state as quickly as from across town.

Making the switch with GCDL

We accept scans from every major intraoral scanner, including iTero, 3Shape TRIOS, Medit, Dentsply Sirona and Carestream. Connecting takes a few minutes and you only do it once:

New to GCDL? Send your first case or request a starter kit, and call (224) 754-3100 with any questions about going digital.

Sources

  • Sajid Ahamed, “Intraoral Scanner ROI: iTero vs Trios vs Medit,” Dental Practice Insider, updated October 26, 2026. dentalpracticeinsider.org/intraoral-scanner-roi-comparison. Dollar figures above are that article’s illustrative inputs, not GCDL prices or benchmarks.
  • GCDL first-time fit and lab-time figures: GCDL case data, as shown on the GCDL homepage.