Dental Lab Products’ April 2021 issue featured GCDL in a story by Stan Goff about how a material change paid off in the lab and at the chair. Here is the summary.
A lab built on digital
The article traces GCDL from its start in 2006, when Ben Topaz and one to three technicians did everything by hand, to a digital lab with nearly 40 people in a 10,000-square-foot facility at the time. The turning point came about six years earlier, when scanners, mills and 3D printers became affordable and reliable enough to trust with production. Ben said the lab waited on printers until they were dependable, because it didn’t want to adopt anything that wouldn’t improve quality.
The switch to Zirlux Transitions
After testing it for several months, the lab moved its zirconia work to Zirlux Transitions from Zahn Dental. It is a layered zirconia that shifts in shade and translucency like a natural tooth, rated at 1,200 MPa, and indicated for full-contour crowns, bridges up to 14 units, inlays, onlays and frameworks, front and back.
What changed in the lab
- Less inventory. Before, the lab kept separate pucks for high-translucency and high-strength cases. One material now covers both, cutting zirconia inventory by almost 30%.
- Less labor, more output. Every puck change means pulling stock, nesting the puck, loading the mill and stopping it again. With one material, twenty A2 units can go on one puck instead of three, so milling runs longer between changes.
What changed for doctors
The biggest gain, Ben said, was in full-arch work. GCDL makes many one-piece milled zirconia bridges over implants, and those used to give up translucency to keep their strength. With a layered material the lab could still mill full arches in one piece without losing translucency. That is the thinking behind today’s full-arch zirconia and full-contour zirconia crowns.
Choosing a zirconia today
Zirconia materials have kept improving since 2021. For help choosing between zirconia, E.max and PFM for a case, see our crowns and bridges page or our answer on when to choose E.max, and check the zirconia prep requirements before you prep. Call (224) 754-3100 to talk through a case.



