In September 2022, Inside Dental Technology asked GCDL President Ben Topaz what intraoral scanners do for a dental lab, what to look for when buying one, and how a dentist should get started. This is a summary of his answers, with links to how GCDL works with scans today.
What scans save
Most remakes trace back to a flawed impression, and in Ben’s experience scans reduce those by as much as 70%. A scan also reaches the lab the moment it is sent, so the cost and delay of shipping an impression disappear. And where analog cases usually include stone models at no charge, a scan lets the lab 3D print a model when one is needed.
Not every scanner is equal
The finished restoration can only be as good as the scan. Ben pointed out that lower-cost scanners can struggle on cases such as partial dentures, where the fit then comes out less than exact, while the leading scanners deliver the fits labs want. Two developments stood out to him:
- Full-denture scanning. Leading scanners can now capture edentulous arches, which opens the door to a fully digital workflow for dentures. Crown and bridge and implants already work on every scanner.
- Automatic scan checks. Some scanners’ software accepts or rejects a scan before it is sent, so the lab doesn’t have to inspect every file and call the office about a poor one.
What to compare before buying
- Monthly fees and software licenses, which vary a lot between brands.
- Ongoing costs: disposable sleeves on some scanners, a replacement mirror roughly every 150 scans on others, and disinfecting the wand between patients.
- Whether the software lets the dentist mark their own margins.
Who gets the return
Ben was candid that the return is harder for a dentist to justify on materials alone, since the main direct saving is impression material. The lab saves more, on shipping, models and remakes, which is why GCDL has bought scanners for some of its offices. He found that an office with a scanner typically sends about 30% more work. For the practice side of the math, see what switching to digital impressions saves your practice.
The key takeaway: technique still matters
A scanner is not a magic wand. Whatever the dentist sees on screen is what the lab sees: if the margins aren’t visible, we can’t see them either, and an open bite on the scan is an open bite on the crown. Ben’s advice is to scan only single crowns for the first three to four weeks, then move to three-unit bridges, and only then to partials and full arches.
Sending scans to GCDL
We accept scans from every major scanner. Our digital protocols walk you through connecting iTero, 3Shape TRIOS, Medit and Dentsply Sirona. Questions? Call (224) 754-3100.



